Cadem ~ Template by entiri

Water penetration through walls

Waterproofing  Walls of brick, stone and other masonry with Aqua Repel

Water penetration through walls is bad for your house and for you! Waterproofing walls externally can be easy and simple.

Most conventional building materials are absorbent, and therefore when exposed to persistent rain, can become saturated. This often results in dampness occurring on the inside of the property. Damp walls not only ruin interior decorations, but they are cold, and the presence of moisture encourages mould growth which is a health hazard.

Waterproofing walls with Aqua-Repel will prevent further moisture penetration whilst still allowing residual moisture to escape by evaporation. As the waterproof walls dry, algae and fungal deposits will become inert, and can be removed. Waterproofing walls eradicates the presence of water in the wall, and insulating properties will improve

info buy   

Externally, moisture at the surface encourages the growth of Moss and Algae, the roots of which damages the fabric of the structure. In addition, moisture in the surface makes it vulnerable to frost damage. Waterproofing walls can prevent this


THE SOLUTION – Aqua-Repel water repellent impregnation for waterproofing walls.

 Aqua-Repel applied to the outside of the wall will prevent water penetration, whilst allowing any existing moisture in the wall to escape by evaporation.

info buy   

If algae is present, before applying Aqua-Repel for waterproofing walls, the walls should be treated with Eco-Chem Multi-Surface Algae Remover and thoroughly cleaned

info buy   

Waterproofing Previously Painted Walls

Waterproofing walls that have been previously painted can be achieved in 2 ways:


Masonry Coatings in Good Condition

Some existing masonry coatings may appear to be in good condition but are letting in water. Waterproofing walls like this is easily done by the application of DO-IT-ALL Clear Acrylic Sealant. For best results, DO-IT-ALL should be applied by low pressure garden sprayer such as the one shown below:


DO-IT-ALL is not only ideal for sealing and waterproofing walls ( 2 coats recommended),  but is also the perfect preparation for subsequent applications of masonry paint.

info buy   

Waterproof Masonry Paint for Deteriorated Masonry Walls


Deteriorated paint coatings can be replaced with  waterproof coatings that are also elastic, crack -bridging and longer lasting for waterproofing walls. Applied more thickly than conventional masonry coatings, Murfill Waterproofing Paint for waterproofing walls is a high build water based acrylic paint that can be applied by brush, roller or spray. 

info buy   

Previously unpainted absorbent surfaces require priming with Primer 44      info buy   

Murfill Waterproofing Paint can be supplied in any colour and is mixed to order. Please contact us for more information regarding colours.

info buy   

What Clients Say

“I had a problem in my villa in Marbella where I have a 220 m² terrace set above 4 bedroom basement.When it rained I was getting water ingress through the bedroom ceilings in 8 different points.

To lift the terrace and relay, I was quoted €22k.I spoke to Abacus who recommended Do It All.

I wasn't totally convinced, but gave the terrace 2 coats during the summer paying particular attention to the grouting "cracks". Since then, I haven't had a problem, it was bone dry all last winter and I will continue to apply a coat as a preventative measure every year.

Really does what it says on the tin.
DH, Mabella